Basic information

Name	R. Keith Stanfill
Title	Director, Integrated Product and Process Design Program
Academic rank	Associate Engineer
Ph.D.	Mechanical Engineering, University of Florida, 1995
M.E.	Mechanical Engineering, University of Florida, 1991
B.S.	Mechanical Engineering, University of Florida, 1985
Years of service	10
Original appointment date	28 May, 1999

Contact information

Address	University of Florida Department of Industrial & Systems Engineering 303 Weil Hall PO Box 116595 Gainesville, FL 32611
Phone	352-846-3354
Fax	352-393-3537
Email	stanfill @ ufl.edu
Web	http://www.ippd.ufl.edu
Office	378 Weil (hours)

Experience & registry

2005 to present	Associate Engineer, Industrial & Systems Engineering, University of Florida
2001 to present	Director, Integrated Product & Process Design program, University of Florida
1999 to 2005	Assistant Engineer, Industrial & Systems Engineering, University of Florida
1999 to 2001	Associate Director, Integrated Product & Process Design program, University of Florida
1998 to 1999	Project Engineer, Compression Systems Component Center, United Technologies—Pratt & Whitney, West Palm Beach, FL
1995 to 1998	Senior Staff Engineer, Global Manufacturing Systems, United Technologies—Carrier Corporation, Syracuse, NY
1992 to 1995	Instructor and Teaching Assistant, Department of Mechanical Engineering, University of Florida, Gainesville, FL
1986 to 1991	Senior Design Engineer, Government Engines and Space Propulsion, United Technologies—Pratt & Whitney, West Palm Beach, FL
Registry	Professional Engineer, license no. PE 0048234, mechanical engineering discipline, State of Florida

Principal publications of past 5 years

Academic

Stanfill, R. K, “Web-Enabled System for Managing Student Applications for a Selective Industry-Sponsored Multidisciplinary Capstone Design Program,” Proceedings of the American Society for Engineering Education 2008 Annual Conference & Exposition, Pittsburgh, PA, June 23-25, 2008, (CD-ROM). Stanfill, R. K., T. Astleford, “Improving Entrepreneurship Team Performance through Market Feasibility Analysis, Early Identification of Technical Requirements, and Intellectual Property Support,” Proceedings of the American Society for Engineering Education 2007 Annual Conference & Exposition, Honolulu, Hawaii, June 24-27, 2007, (CD-ROM). Stanfill, R. K., R. Santacroce, “A Comparison of Capstone Design Course Choices for Undergraduate Industrial Engineering Students: Requirements and Advantages of the Integrated Product and Process Design Program versus Senior Design Project,” Proceedings of the National Capstone Design Course Conference, University of Colorado, Boulder, CO, June 13 to 15, 2007 (CD-ROM.) Crisalle, O. D., R. K. Stanfill, “Integrated Product and Process Design at the University of Florida,” Proceedings of the AIChE 2006 Annual Meeting, San Francisco, CA, November 2006. Lindner, Angela S., R. K. Stanfill, M. Hodges, and A. Rajvanshi, “Expanding the Boundaries of Design of Products and Processes for Solutions to Problems in the Developing World,” Proceedings of the International Conference on Engineering Education, San Juan, PR, July 2006. Stanfill, R. K., Sander, E. J., Rossi, W. J., Ingley, H. A., Whitney, E. D., Hoit, M. I., “Integrating Entrepreneurial Projects into a Successful Multidisciplinary Capstone Design Program at the University of Florida,” Proceedings of the American Society for Engineering Education 2004 Annual Conference & Exposition, Salt Lake City, Utah, June 20-23, 2004, 9 pp. (CD-ROM). An Algorithmic, Heuristic Methodology for the Optimum Utilization of Technological Innovations as Applied to Diamond Coating, Ph.D. dissertation, University of Florida, 1995

Internal industry guides

Guide to Kanban Planning System Version 2.0 Implementation, Copyright 1998, Carrier Corporation Kanban Planning System Version 2.0 User Guide, Copyright 1998, Carrier Corporation Guide to IDS-PDS Implementation, Copyright 1998, Carrier Corporation Guide to DFx, Copyright 1997, Carrier Corporation

Societies, honors and awards

Memberships	American Society of Mechanical Engineers American Society for Engineering Education Institute of Industrial Engineers
Awards	Extraordinary Team Effectiveness Award, United Technologies—Carrier Corporation, 1998 President’s Club Cost Reduction Commendations, 1989 and 1990

Institutional & professional service

2009 to present	Paper Review Chair, Working Groups Planning Committee Member, Fundraising Committee Member, Panels Committee Member, Conference Organizing Committee Member, National Capstone Design Course Conference, University of Colorado, Boulder, CO, June 2010.
2009 to present	College of Engineering Faculty Council
2009 to present	Faculty Senator
2009	Lead Facilitator, National Capstone Design Course Conference Call for Papers Workshop, 2009 ASEE Annual Conference, Austin, TX, June 2009.
2008 to 2009	Budget Cut Advisory Committee
2008 to present	Building Emergency Coordinator
2008 to 2009	Faculty Advisor (interim), IIE Student Chapter
2007	Session Moderator, “Multidisciplinary Teams,” Multidisciplinary Engineering Division, American Society for Engineering Education 2007 Annual Conference and Exposition, Honolulu, HI, June 2007.
2007	Chair, “Institutionalizing Track,” National Capstone Design Course Conference, University of Colorado, Boulder, CO, June 2007.
2007 to present	Capstone Design Task Force
2006 to 2007	Organizing committee, National Capstone Design Course Conference, University of Colorado, Boulder, CO, June 2007.
2006 to 2009	Membership Chair, ASEE Entrepreneurship Division Board of Directors
2006	Session moderator, “IP and Technology Transfer” track, National Collegiate Inventors and Innovators Alliance 2006 Annual Conference, Portland, OR, March 2006.
2004 to present	Faculty Advisor, UF Men’s Soccer Club
2003 to present	Chair, Integrated Technology Ventures (ITV) Board of Directors
2001 to 2002	ISE Undergraduate Curriculum Committee
2001 to present	Integrated Product & Process Design (IPPD) Advisory Board
2001 to present	ISE SACS/ABET Committee
1999	Coordinated IBM Storage Systems equipment donation to College of Engineering

Courses taught

2006	EGN1935 Creative Problem Solving
2001 to present	EIN3101C: Introduction to Industrial & Systems Engineering
1999 to present	EIN4912: Integrated Product & Process Design I (IPPD1) EIN4913: Integrated Product & Process Design II (IPPD2)

Professional development activities

2006	Performance Management, University of Florida
1999	Sexual Harassment Mini-Conference, University of Florida Business Decision Making Course, United Technologies—Pratt & Whitney
1998	UTC—Pratt & Whitney: Covey’s Seven Habits of Highly Effective People Unigraphics Solids Fundamentals Turbine Design Introduction to ANSYS Valuing Diversity
1995 to 1997	UTC—Carrier Corporation Design for Manufacture/Assembly (DFMA, DFA, DFM, DFx) Train-the Trainer Facilitation and Training Skills Certification In Focus Communications Diversity Mistake Proofing Failure Mode and Effects Analysis (FMEA) Lean Production Systems Design Institute (University of Tennessee)

Revised: 12 January, 2010